Your Cart

Your cart is currently empty.

Continue Shopping

User Manual

Please read these instructions carefully to understand how to operate your Bradley timepiece.

  

Product Specifications 

 

Bradley Classic Canvas and Bradley Classic Mesh, 

Case: Titanium
Dimensions: 40mm (diameter) / 11.5mm (thickness)
Fitting: Wrist size 6 ½ inches - 8 ¼ inches / 20mm width
Battery: Renata 371 button cell watch battery
 

 

Special Editions: Bradley x Dezeen and Bradley x KBT

Dimensions: 40mm (diameter) / 11.5mm (thickness)
Case: Titanium
Fitting: Wrist size 6 ½ inches - 8 ¼ inches / 20mm width
Battery: Renata 371 button cell watch battery

Bradley Element Series, Bradley Edge Series

Dimensions: 40mm (diameter) / 11.5mm (thickness)
Case: Titanium
Fitting: Wrist size 6 ½ inches - 8 ¼ inches / 20mm width
Battery: Renata 371 button cell watch battery

 

Bradley Voyager Series, Bradley Lux Series, Bradley Compass Series

Dimensions: 40mm (diameter) / 11.5mm (thickness)
Case: stainless steel
Face: aluminum
Fitting: Wrist size 6 ½ inches - 8 ¼ inches / 20mm width
Battery: Renata 371 button cell watch battery

 

Adjusting and Setting Time:

 

Here are the steps to get your Bradley started:

 

First check the side of the timepiece to see if there is a white plastic stopper between the crown and the timepiece body. If there is a stopper, remove it and carefully ensure that there are no plastic pieces left behind.

 

 

Pull the crown out on the side until you feel a click. Rotate the crown counterclockwise (the ball bearings will move clockwise). Turn the knob clockwise to set your desired time. Once you have finished, push the knob back in until you feel a click. 

 

Mesh Straps:

Bradley Classic Mesh, Bradley Black, Bradley, Bradley Edge, and Bradley Compass Iris models 

 

Adjust the Strap Size

 

  

LIFT: Place a small tool (flathead screwdriver or adjustment tool) in the slot on the clasp. Lift the bar in the direction facing away from the straight pin (place the tool so the handle is in the direction of the case of the watch). Leveraging the tool against the straight pin may result in the straight pin bending.

SHIFT: Push the adjustment buckle to the desired position (make sure the clasp is set in one of the indentations on the back of the band).

PRESS: Push the slotted clasp closed, not using the straight pin as leverage to protect against bending

 

Closing the Clasp 

Pull the Hook over the pin, Snap: the flat clasp closed, then close the security clasp.

 

Installing a New Wristband

The Bradley will accommodate any other strap in our collection and most 20mm straps. Older Bradley Timepiece's will use a spring bar while current Bradley Timepieces will start moving over to easy release lever straps. If you ever need extra spring bars, just email us at hello@eone-time.com

Place a spring bar tool on the spring bar. Press down on the spring bar tool and pull it slightly inwards towards the center of the strap. This will eventually loosen and detach the spring bar from the strap. Take out the spring bar and place the spring bar on the side. Follow the same step to remove the strap on the opposite side of the watch. After you have taken out all the straps, take the new straps and place it in between the notches to insert the spring bar.

 

Water Resistance

 

The Bradley will easily withstand splashes or brief immersion in water, like getting caught in the rain or washing hands. However, it is not waterproof. Therefore activities such as swimming, water sports, bathing may cause damage. We recommend not to wear your Bradley while doing any sorts of aggressive sports activities.

 

Cleaning

 

To clean your Bradley, use a clean dry cloth to wipe out the debris on the watch surface. Remember that the titanium body is not scratch resistant so do not rub it with a rough material.

 

Battery

 

Bradley timepiece uses a Renata 371 button cell watch battery that lasts for about 2 years. To change your battery, you can take it to a local watch store and ask them to change the battery for you.